PHE spares
Spare plates and gaskets for plate heat exchangers
Aftermarket spare plates, gaskets and complete plate packs, matched to the pack already in your frame — for units from most OEM manufacturers, including discontinued models.
How to identify your unit
- 1
Photograph the data plate
It carries the manufacturer, model, serial number and often the plate count.
- 2
Photograph one plate corner
Close enough to show the port and the pattern pressed into the plate.
- 3
Send us both
We identify the plate type, material and gasket grade, and come back with what you need.
Send them with the enquiry form, or email energy@thermaliq.com.au.
Brands and models
Find the plates and gaskets for your unit
Search the models we supply aftermarket spare plates and gaskets for. They are only a selection — there are many more models worldwide, and we can source many more than are listed here.
Type the model from your data plate — part of it is enough. Searches all 10 brands at once.
- NT25M
- NT50T
- NT50M
- NT50X
- NT100T
- NT100M
- NT100X
- NT150S
- NT150L
- NT250S
- NT250M
- NT250L
- NT350T
- NT350S
- NT350M
- NT350L
- NT500T
- NT500M
- NT500L
- NT500X
- NX25M
- NX80M
- NX100X
- NX150X
- NX250L
- NX250X
- NX350M
- NH100L
- NH250S
- NH250M
- NH250L
- NH350S
- NH350M
- NH350L
- NL80
- NK100
- ND50M
- ND50X
- ND100T
- ND100M
- ND100X
- ND150S
- ND150L
- NP100M
- NP100X
- NP150X
- NP250M
- NP250L
- VX07
- VX13
- VT04
- VT10
- VT20
- VT402
- VT405
- VT40
- VT80S
- VT80
- VT1306
- VT250
- VT10DS
- VT20DS
- VT40DS
- LWC100T
- LWC100M
- LWC100X
- LWC150S
- LWC150M
- LWC250S
- LWC250L
- LWC350S
- LWC350M
- LWC500T
- LWC500M
- LWC500L
- M3
- M6
- M10
- M15
- M20
- M30
- MX25B
- P2
- P5
- P12
- P13
- P15
- P16
- P17
- P20
- CLIP3
- CLIP6
- CLIP8
- CLIP10
- CLIP12
- CLIP15
- CLIP20
- CLIP25
- CLIP30
- SR1
- SR2
- SR3
- SR6
- SR14
- B63
- B110
- B158
- R5
- R6
- R10
- R40
- R55
- TR9
- LR9
- LD9
- S4
- S7
- S18
- S9
- S14
- S15
- S16
- S65
- S100
- S130
- S188
- GX-6
- GX-12
- GX-18
- GX-42
- GX-51
- GX-60
- GX-85
- GX-145
- GX-285
- GX-325
- GC-12
- GC-16
- GC-26
- GL-13
- GL-85
- UX-01
- UX-10
- UX-20
- UX-30
- UX-40
- EX-11
- EX-15
- LX-10
- LX-20
- LX-30
- RX-11
- RX-13
- RX-30
- FP02
- FP04
- FP05
- FP08
- FP09
- FP10
- FP14
- FP16
- FP19
- FPS30
- FPS65
- S12
- S16
- S22
- S32
- S52
- S64
- S85
- SX13
- SX19
- SX29
- SX49
- FP7
- E8
- E18
- E20
- E32
- E40
- E51
- E61
- E82
- V2
- V4
- V7
- V8
- V20
- V28
- V45
- VU8
- VU12
- VU13
Cannot find your model? We can source many more than are listed here. Send us a photo of your data plate and we will identify it.
Brand and model names are used for identification only. All brand names are the property of their respective owners. Parts supplied are aftermarket and are not original manufacturer parts.
What we supply
Spare plates, spare gaskets and complete plate packs
Individual plates to replace a cracked or corroded one, a full set of gaskets for a re-gasket, or a complete plate pack ready to hang in the existing frame.
Replacement plates
Matched to your unit on pattern, material and thickness, with the plate pressing depth measured.
Gaskets
NBR, EPDM, FKM, HNBR and food grade compounds — clip-on or glued to suit the plate.
Full replacement plate packs
A complete pack of plates and gaskets, ready to hang in the existing frame.
Attrition stock
We hold attrition stock of plates and gaskets for customers, so replacements for your unit are already on hand.
Plate heat exchanger service
Refurbish the pack rather than replace the unit
A gasketed plate heat exchanger is a serviceable asset. New plates and gaskets in a sound frame put it back on duty.
- 1
A fraction of the cost of a new unit
Chemical and mechanical cleaning of the pack, replacing tired gaskets and re-torquing the frame to its closing dimension can return it to duty without replacing the exchanger.
- 2
Dye penetrant crack testing
Plates are dye penetrant crack tested, so a cracked plate is replaced rather than hung back in the frame.
- 3
A condition report on the plate pack as a whole
When the work is done you get a condition report covering the plate pack as a whole.
Questions
Spares FAQs
How do I identify which spare plates and gaskets I need?
Start with the data plate on the frame — it carries the manufacturer, model, serial number and often the plate count. Photograph it, then photograph the corner of one plate showing the port and pattern. That is usually enough for us to identify the plate type, material and gasket grade.
Do you supply Kelvion and Tranter spares?
Yes. We supply aftermarket spare plates and gaskets for the Kelvion / GEA and Tranter models listed on this page, as well as Alfa Laval, SPX / APV, Sondex, HISAKA, FUNKE, API Schmidt Bretten, FISCHER and VICARB units. Parts are aftermarket, not original manufacturer parts.
My model isn't listed. Can you still help?
Very likely. The list is only a selection — there are many more models worldwide, and we can source many more than are listed here. Send us a photo of your data plate and we will identify it.
Can you supply for a discontinued unit?
Yes. We supply for units from most OEM manufacturers, including discontinued models. Send us the data plate and the plate corner photographs, and we'll tell you plainly what we can supply for it.
Which gasket materials do you supply?
NBR, EPDM, FKM, HNBR and food grade compounds, as clip-on or glued gaskets to suit the plate. We identify the grade from your unit.
How quickly can you turn it around?
It depends on the plate, the gasket grade and how many you need. Once we've identified the unit you get a firm lead time with the price, and if the plant is down, call us so we can work to your shutdown window.
Get your spares identified
Tell us about the unit
The make and model from the data plate, how many plates or gaskets you need, and when the plant can come down. We'll come back with what fits and a price.
Rather talk it through? (02) 8710 8106
